Using NFC/RFID tags on mobile

If you are interested in ordering NFC or HF RFID tags, please send us an email at support@trail.fi

HF RFID tags are readable without an additional reader. Please note that UHF RFID tags require an additional reader, such as an As Reader. 

Adding a HF RFID tag to an item 

  1. Open the item card of the item you wish to link to the tag
  2. Click the scan symbol on the top of the page
  3. If/When the tag has not been connected to any other item on Trail, Trail will then ask you 'The identity you scanned was not found. Do you want to attach this tag for this item?'
  4. After selecting 'Yes', another pop up will appear, saying 'RFID-tag set for the item'
  5. Now the tag is connected to the item and is ready to use. 

Deleting a HF RFID tag from an item

Deleting a tag from an item can only be done on browser

  1. Open the item card on browser
  2. Select 'Edit' on the top right corner of the item card page
  3. Delete the code written on the RFID -field 
  4. Save the changes by clicking the 'Save' button at the bottom of the page
  5. Now the tag is no longer connected to the item and the tag can be used again