Printing labels


Labels can be used to identify items and connect them to the correct item card in Trail. You can print labels for individual items from the item card or for multiple items at once from the item list.

Trail supports both QR/barcode labels and RFID labels.

Note: Printing labels requires Editor rights to Items.

  1. Open the item card
  2. Click Print label
  3. If you have multiple printers, select the printer
  4. Click Print
  5. The label should start printing within a minute

Use the item list when you want to print labels for multiple items at once.

  1. Open the item list
  2. Search for the items
  3. Select the items using the checkboxes
    • To select all items on that page, select the first checkbox
  4. Click Print label
  5. If you have multiple printers, select the printer
  6. Click Print
  7. The labels should start printing within a minute

Remove printed labels from the printer

After printing, tear off the labels by holding the roll close to the printer and pulling it downwards and to the side. This helps keep the label roll in place.

Do not pull the labels straight towards you, as this may affect the printer alignment.